22
E5917, Haffner Rd, Weyauwega, WI 54983, USA
Weyauwega, Wisconsin 54983
+1 920-867-2820

We broke down on the highway; they brought their trailer and got us back on the road the same day. Luckily, it wasn't a catestrophic issue. Even luckier that we called waupaca sport and cycle.

Took you 3 hours to tune when you only made one map and I asked for 2 separate maps and everywhere else takes 1 hour a per map

-Dyno chart runs only to 4k engine runs lot higher than that and makes power and stock runs to 9k

Shannon Schick

-66 lbs of torque doesn't make any since in my set up way to high should be around 50

Took my 2007 raptor 700 to Waupaca Sport and Cycle asked him to make 2 separate maps for my raptor one for K&N and one for Prodesign filter and these are the issues I had with it after picking it up from the Dyno

-Didn't receive a record log

I didnt know what to expect as I found them online and didnt have any buddy insight. After talking with Luke it was obvious he is very knowlegeable in what he does. I was suprised to learn that my machine was running too lean (I assumed just the opposite) and even though they had to richen up the gas mixture he was still able to get another 18hp out of my Scrambler 1000 with just the pipe and power commander. I havent had it out for an official ride yet but I can tell from the short jaunt in my driveway that it is running so much better and had so much power where I now have some fear of it. Haha

-Prodesign running lean plug is also white

I dont know if I should thank Waupaca Sport and Cycle repeatedly or cuss at them for turning my already fast machine into what appears to now be a terrifyingly fast death machine!

-Plain and simple your Dyno was not set up properly or calibrated

My raptor 700 has full Yoshimura exhaust 11-1 compression stage 2 cam Port and polish FCI intake with a PC5 on it

-Only 37hp that's what stock makes should easily be 50 or higher

In conclusion, if I have a need to tune up in the future, I will be returning to them even if a dyno tune place for ATV's opened up in my area. Thanks Waupaca Sport & Cycle, you just made my Christmas!

-Needs to be properly done again so I don't burn the machine down

-292 miles round-trip twice roughly $40 in gas

- If I continue to run the machine the way it is will more than likely burn it down

-You openly emitted you don't like power command 5 not sure you knew what you were doing

correct

-Check plug burnt white (lean)

Fast quality service. Very fair pricing. Very satisfied. He even picked up and dropped bike off!

-K&N lean on bottom and top and will stall out on the bottom sometimes

Show Map

Waupaca Sport And Cycle Llc — Car Repair in Weyauwega

We are glad to greet you!

Waupaca Sport And Cycle Llc

Car Repair at E5917, Haffner Rd, Weyauwega, WI 54983, USA. Here you will find detailed information about Waupaca Sport And Cycle Llc: address, phone, fax, opening hours, customer reviews, photos, directions and more.

Opening hours

  • Monday
    9:00 AM – 5:00 PM
  • Tuesday
    9:00 AM – 6:00 PM
  • Wednesday
    9:00 AM – 5:00 PM
  • Thursday
    9:00 AM – 6:00 PM
  • Friday
    9:00 AM – 5:00 PM
  • Saturday
    9:00 AM – 1:00 PM
  • Sunday
    Closed

Rating

4
/
5
Based on 22 reviews

Contacts

Categories:
State:
Wisconsin
Address:
E5917, Haffner Rd, Weyauwega, WI 54983, USA.
City:
Weyauwega
Postcode:
54983

About Waupaca Sport And Cycle Llc

Waupaca Sport And Cycle Llc is a US Car Repair based in Weyauwega, Wisconsin. Waupaca Sport And Cycle Llc is located at E5917, Haffner Rd, Weyauwega, WI 54983, USA.


Please contact with Waupaca Sport And Cycle Llc using information above: Address, Phone number, Fax, Postal code, Website address, E-mail, Facebook. Find Waupaca Sport And Cycle Llc opening hours and driving directions or map. Find real customer reviews and ratings or write your own review.

Are you the owner?
You can make a change to the page:
Edit this page

ALL reviews about Waupaca Sport And Cycle Llc

  • Alyssa
    Added 2016.06.02
    We broke down on the highway; they brought their trailer and got us back on the road the same day. Luckily, it wasn't a catestrophic issue. Even luckier that we called waupaca sport and cycle.
  • Melanie
    Added 2016.05.23
    Took you 3 hours to tune when you only made one map and I asked for 2 separate maps and everywhere else takes 1 hour a per map
  • Adrian
    Added 2016.03.12
    -Dyno chart runs only to 4k engine runs lot higher than that and makes power and stock runs to 9k
  • Christian
    Added 2015.10.21
    Shannon Schick
  • Jake
    Added 2015.10.11
    -66 lbs of torque doesn't make any since in my set up way to high should be around 50
  • Sarah
    Added 2015.09.22
    Took my 2007 raptor 700 to Waupaca Sport and Cycle asked him to make 2 separate maps for my raptor one for K&N and one for Prodesign filter and these are the issues I had with it after picking it up from the Dyno
  • Nicole
    Added 2015.08.17
    -Didn't receive a record log
  • Nicholas
    Added 2015.01.12
    I didnt know what to expect as I found them online and didnt have any buddy insight. After talking with Luke it was obvious he is very knowlegeable in what he does. I was suprised to learn that my machine was running too lean (I assumed just the opposite) and even though they had to richen up the gas mixture he was still able to get another 18hp out of my Scrambler 1000 with just the pipe and power commander. I havent had it out for an official ride yet but I can tell from the short jaunt in my driveway that it is running so much better and had so much power where I now have some fear of it. Haha
  • Jordan
    Added 2014.10.31
    -Prodesign running lean plug is also white
  • Victoria
    Added 2014.10.24
    I dont know if I should thank Waupaca Sport and Cycle repeatedly or cuss at them for turning my already fast machine into what appears to now be a terrifyingly fast death machine!
  • Amelia
    Added 2014.05.08
    -Plain and simple your Dyno was not set up properly or calibrated
  • Diego
    Added 2014.04.18
    My raptor 700 has full Yoshimura exhaust 11-1 compression stage 2 cam Port and polish FCI intake with a PC5 on it
  • Sara
    Added 2014.04.15
    -Only 37hp that's what stock makes should easily be 50 or higher
  • Logan
    Added 2014.01.25
    In conclusion, if I have a need to tune up in the future, I will be returning to them even if a dyno tune place for ATV's opened up in my area. Thanks Waupaca Sport & Cycle, you just made my Christmas!
  • Sarah
    Added 2014.01.22
    -Needs to be properly done again so I don't burn the machine down
  • Sophia
    Added 2014.01.20
    -292 miles round-trip twice roughly $40 in gas
  • Arianna
    Added 2013.12.11
    - If I continue to run the machine the way it is will more than likely burn it down
  • Isabella
    Added 2013.10.20
    -You openly emitted you don't like power command 5 not sure you knew what you were doing
  • Aidan
    Added 2013.08.06
    correct
  • Cody
    Added 2013.07.19
    -Check plug burnt white (lean)
  • Savannah
    Added 2013.07.02
    Fast quality service. Very fair pricing. Very satisfied. He even picked up and dropped bike off!
  • Aaliyah
    Added 2013.06.02
    -K&N lean on bottom and top and will stall out on the bottom sometimes
Leave your own review about Waupaca Sport And Cycle Llc:
Add a review